Screening and analytical confirmation of sulfonamide residues in milk by capillary electrophoresis-mass spectrometry

A new methodology is proposed to automate the monitoring of sulfonamide residues in milk samples. It combines a screening unit for the total amount of sulfonamide with capillary electrophoresis-mass spectrometry (CE-MS) equipment for processing the samples containing a detectable level of sulfonamide. The screening unit consists of continuous-flow system (CFS) to precipitate the proteins connected on-line to the CE-MS equipment, in which a common characteristic ion of all sulfonamides was monitored with the MS detector by flushing the sample through the capillary. The confirmatory method is based on the purification and preconcentration of sulfonamides in a CFS unit and posterior analysis by CE-MS. The sample treatment unit was also on-line connected to the CE-MS equipment. In order to increase sensitivity, the flow rate of the sheath liquid was diminished from 0.5 to 0.2 microL.min(-1) by increasing the content in water from 0 to 50% and the formic acid from 0.5 to 1.5% in this liquid and by applying an overimposed pressure of 5 mbar during the electrophoretic separation. The method allowed the analysis of 30 samples per hour.     

Design and synthesis of aromatic inhibitors of anthranilate synthase

Aromatic analogues of chorismate were synthesised as potential inhibitors of anthranilate synthase. Molecular modelling using GOLD2.1 showed that these analogues docked into the active site of Serratia marcescens anthranilate synthase in the same conformation as chorismate. Most compounds were found to be micromolar inhibitors of S. marcescens anthranilate synthase. The most potent analogue, 3-(1-carboxy-ethoxy)-4-hydroxybenzoate (K(I) 3 microM), included a lactyl ether side chain. This appears to be a good replacement for the enol-pyruvyl side chain of chorismate.     

Electrophoretic properties of complexes between DNA and the cationic surfactant cetyltrimethylammonium bromide

We use agarose gel electrophoresis to characterize how the monovalent catioinic surfactant cetyltrimethylammonium bromide (CTAB) compacts double-stranded DNA, which is detected as a reduction in electrophoretic DNA velocity. The velocity reaches a plateau at a ratio R = 1.8 of CTAB to DNA-phosphate charges, i.e., above the neutralization point, and the complexes retain a net negative charge at least up to R = 200. Condensation experiments on a mixture of two DNA sizes show that the complexes formed contain only one condensed DNA molecule each. These CTAB-DNA globules were further characterized by time-resolved measurements of their velocity inside the gel, which showed that CTAB does not dissociate during the migration but possibly upon entry into the gel. Using the Ogston-model for electrophoresis of spherical particles, the measured in-gel velocity of the globule is quantitatively consistent with CTAB having two opposite effects, reduction of both the electrophoretic charge and DNA coil size. In the case of CTAB the two effects nearly cancel, which can explain why opposite velocity shifts (globule faster than uncomplexed DNA) have been observed with some catioinic condensation agents. Dissociation of the complexes by addition of anionic surfactants was also studied. The DNA release from the globule was complete at a mixing ratio between anionic and cationic surfactants equal to 1, in agreement with equilibrium studies. Circular DNA retained its supercoiling, and this demonstrates a lack of DNA nicking in the compaction-release cycle which is important in DNA transfection and purification applications.     

Optimizing Cs-exchange in titanosilicate with the mineral pharmacosiderite topology: framework substitution of Nb and Ge

Titanosilicates with complete or partial substitution of Ge or Nb in the framework and having the mineral pharmacosiderite topology were hydrothermally prepared and their ion-exchange properties towards Cs were studied for Ti/Ge/Si, Ti/Si, Nb/Ti/Si and pure Ge phases. The basis for the differences in the ion exchange properties measured as distribution coefficients (K_d) for these materials are detailed via structural characterization using the Rietveld refinement technique on the X-ray powder diffraction data. The differences in affinity towards Cs⁺ result either from the degree of hydration of the exchanger resulting in different coordination environments or the position of cesium ion in the eight-ring channel.     

Part I. epoxydes diterpeniques : synthese et reactivite d'epoxydes derives d'acides resiniques

Epoxidation of methyl esters of resin acids with the pimarane skeleton with p-nitroperbenzoic acid has permitted the isolation of epoxides of the intracyclic double bond. Allylic diterpenic alcohols were obtained by acid-catalysed isomerisation of diterpene epoxides, and the action of Collins reagent on these allylic alcohols has been studied.     

Synthesis of [13]-membered macrocyclic stevastelins via a transesterification reaction as the key step: total synthesis of stevastelin C3

A new synthesis of stevastelin C3 (3), a [13]-membered ring component of the stevastelin family, whose structure was recently revised, is reported. Initially, a macrolactonization approach was attempted to generate the [13]-membered macrolactone but this met with failure, so a translactonization reaction was tried to obtain the targeted stevastelin C3 (3) from the corresponding [15]-membered ring counterpart. Unfortunately, this strategy did not prove successful, and, consequently, we opted to undertake a transesterification reaction from 23, as a means to accommodate the requisite aminoacid moiety at the correct position, to obtain 24. From 24, and through intermediates 25-28, the acyclic precursor of the [13]-membered ring macrolactone, compound 30, was efficiently prepared. By utilizing the synthetic course developed by Chida, we took 30 forward and completed the total synthesis of stevastelin C3 (3).     

Experimental analysis and modified rotor description of the infrared fundamental band of HCl in Ar, Kr, and Xe solutions

We report an experimental study of the rotovibrational fundamental PQR-band shapes in the IR absorption spectra of HCl dissolved in condensed rare gases in a wide range of temperatures. The effective vibrational frequencies are determined from analysis of the fine rotational structure partially resolved in the band wings. The central Q-branch components appear redshifted with respect to the effective vibrational frequencies, their shifts in different solvents found to match the HCl stretching mode shifts in binary Rg...HCl van der Waals heterodimers. Theoretical quasi-free rotor and modified rotor models are applied to describe evolution of the band profiles at changing thermodynamic conditions. Both models are shown to reproduce equally well the observed spectral density distributions in the band wings. However, the modified rotor formalism that accounts for depopulation of the lower-energy rotational solute states provides better agreement with the experiment in the range of the P- and R-branch maxima. We surmise that the Q branches separated from the measured spectral profiles are formed by transitions between rotationally hindered states of diatomic molecules coupled to the solvent by the local anisotropy of the interaction potential.     

Determination of cadmium by electrothermal atomic absorption spectrometry after microwave-assisted digestion of animal tissues and sewage sludges

The determination of cadmium in different sample types has been carried out by electrothermal atomization atomic absorption spectrometry with D(2)-background correction using a unpyrocoated graphite tube, after pressurized microwave-assisted digestion. Five chemical modifiers [(NH(4))(2)HPO(4), Pd(NO)(3))(2), Ni(NO(3))(2), thiourea and Triton X-100] have been assayed and nickel nitrate has been found to be most effective for an accurate determination of cadmium in mussel tissue, pig kidney and sewage sludge. The characteristic mass of the method is of the order of 1 pg and the limit of detection is lower than 0.1 ng/ml.     

Beer Digestions for Metal Determination by Atomic Spectrometry and Residual Organic Matter

Many standard and official sample digestion procedures for trace metal determination are carried out in open vessels on hot plates. A new procedure for the determination of trace metals by flame atomic absorption spectrometry or inductively coupled plasmaatomic emission spectrometry in beer samples was developed to be performed in closed reactors assisted by microwaves. The results are compared with the ones obtained by other procedures by means of the analysis of the variance. The differences between the procedures are attributed to residual organic matter. Voltammetry, absorption molecular spectrophotometry and high pressure liquid chromatography with a photodiode array detector are used to study the nature of these residues. Nitrobenzoic acids, phenolic acids and other organic compounds are often present after digestion. The results obtained are related to the precision in metal determination by atomic spectrometry. The need for elaboration of certified reference materials for trace metals in beer is suggested.     

REDUCTION OF NO BY CO OVER NiWO4, NiO, AND WO3 CATALYSTS

We present a comparative study of NiWO₄, NiO, and WO₃ catalysts for simultaneous conversion of NO and CO. Samples were synthesized by reacting ammonium metatungstate and/or nickel nitrate at high temperature (773 K to 903 K) under an oxygen stream. Catalysts were characterized by X-ray diffraction, surface area measurements, energy dispersive spectroscopy and scanning electron microscopy. The catalytic reduction of NO by CO took place in the temperature range (523 to 973) K under highly reductive conditions (NO:CO= 1:5) over NiWO₄NiO, and WO₃, respectively. The 100 % NO conversion at GHSV of 11460 h^-1 was achieved at 773 K over NiWO₄ and at 848 K over NiO. The WO₃ was deactivated at 898 K. However, in the range (523 to 723) K NiO was more active than NiWO₄ and WO₃ catalysts.